If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.